
FL Certified Building Contractor CBC1265305Roofing CCC1334811
Finished right. Permitted. Closed out.
Final Touch Builders is a Florida state-certified building and roofing contractor. Roofs, impact windows, remodels and additions — taken from the first walk-through to the final inspection, anywhere in Florida.
Both certifications can be checked on the Florida DBPR license portal.
What “the final touch” means here
A job isn't done when the crew packs up. It's done when the punch list is clear, the inspector has signed off and the permit shows as closed — so nothing comes back to you at a sale, a refinance or an insurance claim. That last step is the one we never skip.
What we build and repair
Structure, roof, openings and finishes — under one certified contractor.
Roof Repair & Replacement
Leak repairs and full re-roofs in shingle, tile, metal and flat systems, under our state roofing certification.
See the detailsImpact Windows & Doors
Hurricane-rated windows and entry doors with the right product approval for your county, installed and inspected.
See the detailsWind-Rated Garage Doors
Wind-rated garage door replacement and repair for the biggest opening on the house.
See the detailsCode Violation Corrections
Unpermitted work, open permits and cited conditions corrected, inspected and closed with your city or county.
See the detailsHome Remodeling
Whole-home and room renovations, planned in order and built under one certified contractor.
See the detailsAdditions & New Construction
Room additions, second stories and new builds, from permit drawings to certificate of occupancy.
See the detailsKitchen & Bath Remodeling
Kitchens and bathrooms rebuilt with the waterproofing, rough-ins and permits done before the finishes.
See the detailsFence Installation & Repair
Privacy, pool and decorative fences set to your city's height, setback and barrier rules.
See the detailsAccordion Hurricane Shutters
Product-approved accordion shutters that stay mounted and close in minutes before a storm.
See the detailsInterior & Exterior Painting
Interior and exterior painting with the prep — repairs, cleaning, primer — that makes the finish last.
See the detailsSliding Glass Doors
Sliding glass doors repaired to glide and lock again, or replaced with permitted impact sliders.
See the detailsHow a job runs, start to closed permit
- 1
Walk-through
We see the job in person, listen to what you want, and look for what's behind the problem.
- 2
Written scope
You get the work, the materials and the permit plan in writing before anything starts.
- 3
Permit & build
Permits pulled under our state certifications where the work needs them, then built in the right order.
- 4
Inspect & close
Punch list walked with you, final inspection passed, permit closed. Then the job is finished.
Free tool
Does your project need a permit?
Pick the project and your county — any of Florida's 67. See whether it typically needs a permit, the inspections to expect, and whether HVHZ product approval applies.
About Final Touch Builders
Two state certifications. One contractor answerable for the job.
Florida certifies contractors at the state level. A certified building contractor can build, add on and remodel; a certified roofing contractor can permit and install roofs. We hold both, so the structure, the openings and the roof over them are handled by the same company — and the permit has a name on it you can check.
State certifications aren't limited to one city or county, which is why we can take on work anywhere in Florida.
Licensing
- Florida Certified Building Contractor
- CBC1265305
- Florida Certified Roofing Contractor
- CCC1334811
Both are valid in every Florida county. Look either number up on the Florida DBPR license portal.
Anywhere in Florida, built to local rules
The certifications travel statewide; the building rules change with the map. We build to the requirements where your house actually is.
Miami-Dade & Broward
The High-Velocity Hurricane Zone: products need approval for that zone, and installation is held to its stricter rules.
Palm Beach to the Treasure Coast
Florida Building Code wind requirements for the location, with Florida Product Approval on windows, doors and shutters.
Central Florida & the Gulf Coast
Orlando, Tampa Bay, Sarasota, Fort Myers, Naples and the towns between them.
North Florida & the Panhandle
Jacksonville, Gainesville, Tallahassee, Pensacola and everywhere in between.
Request a free estimate
Tell us about the project. You'll hear back from the contractor doing the work, not a call center.
Prefer to talk?
(954) 620-7812